English
inkampani_intr

Iimveliso

Isiboniso se-OLED OHEM12864-05 SH1106G 128×64 1.3” I2C White PMOD Isiboniso Umfanekiso Obonakalayo
  • Umboniso we-OLED OHEM12864-05 SH1106G 128×64 1.3” I2C Umboniso we-PMOD oMhlophe

Umboniso we-OLED OHEM12864-05 SH1106G 128×64 1.3” I2C Umboniso we-PMOD oMhlophe

Inkcazo emfutshane:

Ubukhulu bephaneli: 1.40mm
Ubungakanani be-A/A obuyi-Diagonal: 1.30-intshi


  • Ubungakanani bephaneli:34.50 x 23.0 x 1.40mm
  • Indawo esebenzayo:29.42 x 14.7mm (1.30-intshi)
  • Imatrix yephaneli:128*64
  • Umbala:mhlophe
  • Umqhubi we-IC:SH1106G
  • Ujongano:I-8-bit 68XX/80XX parallel, i-4-wire SPI, i-I2C
  • Imatrix yamachaphaza:128 x 64dot
  • Ubungakanani bechaphaza:0.21 x 0.21mm
  • Iphimbo lechaphaza:0.23 x 0.23mm
  • Indawo esebenzayo:21.744 x 10.864mm
  • Ubungakanani bephaneli:34.50 x 23.00mm

    • Iinkcukacha zeMveliso

    Ulawulo loMgangatho lweHEM

    Iithegi zeMveliso

    Iingenelo ze-OLED

    Ibhityile (akukho sibane sangasemva esifunekayo)

    Ukukhanya okufanayo

    Uluhlu olubanzi lobushushu bokusebenza (izixhobo ze-solid-state ezineempawu ze-electro-optical ezizimeleyo kubushushu)

    Ilungele ividiyo enamaxesha okutshintsha ngokukhawuleza (μs)

    Ii-engile zokubukela ezibanzi (~180°) ezingenayo i-inversion engwevu

    Ukusetyenziswa kwamandla aphantsi

    ubomi bonke

    Ukukhanya okuphezulu, ukukhanya kwelanga kuyafundeka

    I-OHEM12864-05

    Isikrini se-OLED esimhlophe se-OHEM12864-05 SH1106G 128×64 1.3'' I2C esiyenza ibe lukhetho olufanelekileyo kwiintlobo ngeentlobo zezicelo, ukusuka kwiiprojekthi ze-elektroniki ze-DIY ukuya kwizixhobo zobungcali.

    Ngesisombululo see-pixels eziyi-128x64, i-OHEM12864-05 inika imifanekiso ecacileyo necacileyo, iqinisekisa ukuba umxholo wakho uyabonakala. Ubungakanani obuyi-1.3-intshi buyenza ifaneleke kwiiprojekthi ezixineneyo ngelixa isabonelela ngezindlu ezininzi zesikrini zokubonisa umbhalo, imizobo, kunye nee-animations. Itekhnoloji ye-OLED emhlophe ayiphuculi nje kuphela ukubonakala kodwa ikwaqinisekisa ukusetyenziswa kwamandla aphantsi, okwenza ukuba ibe lukhetho olusebenzisa amandla aneleyo kwizixhobo ezisebenzisa ibhetri.

    I-interface ye-I2C yenza kube lula ukunxibelelana, ivumela ukuhlanganiswa okulula nee-micro-controllers kunye neebhodi zophuhliso ezifana ne-Arduino kunye ne-Raspberry Pi. Olu phawu luvumela unxibelelwano olungenamthungo kunye nolawulo, okwenza kube lula ukufikeleleka kubo bobabini abaqalayo kunye nabaphuhlisi abanamava. Isikrini sikwahambelana neelayibrari ezahlukeneyo, siqinisekisa ukuba ungaqala ngokukhawuleza nangokufanelekileyo.

    Yakhelwe ukuqina engqondweni, i-OHEM12864-05 yenzelwe ukumelana nobunzima bokusetyenziswa kwemihla ngemihla. Ulwakhiwo lwayo oluqinileyo luqinisekisa ukuhlala ixesha elide, ngelixa umlinganiselo ophezulu wokungafani ubonelela ngokufundeka okuhle kwiimeko ezahlukeneyo zokukhanya. Nokuba udala isixhobo esenziwe ngokwezifiso, isixhobo esinxitywayo, okanye umboniso osebenzisanayo.

  • Ngaphambili:
  • Okulandelayo:

    • Amandla oLawulo loMgangatho we-HARESAN LCDI-HARESAN-Quality Cotrol

    Bhala umyalezo wakho apha uze uwuthumele kuthi

    iimveliso ezinxulumene noko

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale